
Add to Cart
10 Pair LSA Plus Module Grey Connection Module Silver Plating For Profile Krone Type Label Holder
Material
Plastic component | ABS or PBT (UL-94V0) |
Contact material | Phosphor bronze or Brass |
Contact plating | Silver plating |
Mechanical Performance | Insertion force : 40~75N |
Pull Out Force : F≥25N(axial) F≥7.5N(radial) | |
IDC Life : 200 times(20-26 AWG Solid wire) minimum | |
Copper Conductor Diameter: Φ0.4~Φ0.8(mm) | |
Environment Characteristic | Storage Tempreture: 40 to 70°C |
Operating Temperature : 10 to 60°C | |
Relative Humidity: 95%, noncondition | |
Electrical Performance | Insulation resistance: 1000 Mohms minimum |
Contact resistance:7 mohms maximum | |
Dielectric intensity: AC 1000 Vrms 50Hz or 60Hz in 60s
|
Features :
Based on genuine LSA-PLUS Connection technology.
Avaiable in 10 pair configuration with parallel test access or overvoltage protection contact.
LSA-PLUS module mount on back mount frame.
LSA-PROFIL modules mount on profile rods (8-pair modules: 75mm spacing between rods; 10-pair modules:95mm spacing between rods) or back mount frame.
Suitable for use in all xDSL and ADSL2+ circuits.
Robust long-term environment stability allows both indoor and outdoor installation.
Supports all LSA-PLUS Series 2 accessories :
Overvoltage protection magazine.
Labels & Test and connection cords.
Specification :
Transient voltage : 2.5 kV.
Operation voltage for basic insulation : 210 VDC TNV.
Pollution severity : II.
Current - carrying capacity : 2 A.
Impulse current : 5 kA ( 8 / 2µs ).
Single solid wire per contact : 0.35 mm / 0.68 mm to 0.9 mm / 1.5 mm.
Stranded wires : 0.12mm to 0.32 mm / up to 2.1 mm AWG 28 to AWG 20.
Overall diameter of connectable wire : 0.68 mm to 1.6 mm (solid insulation ).
Storage Temperature: - 40 °C to + 90 °C.
Transport Temperature : - 40 °C to + 90 °C.
Operation Temperature : - 5 °C to + 60 °C.
Relative humidity : < 95% ; no water condensation, no ice.
Atmosphere pressure: 70-106Kpa.